21
3.3 Phone initialization
A
fter the phone is correctly installed and powered on, the phone will start up and
display the following display:
Phone initialization
The red breathing light is always on and the two green account soft keys are
always on, and the LCD screen displays “initializing”.
Get network (the phone's initial network is automatically obtained by DHCP)
After the phone is successfully turned on, the phone will automatically obtain the
assigned IP address, subnet mask, default gateway, DNS server and other
network configuration. If the network cable is connected after the phone is turned
on, the LCD screen will display the prompt of network acquisition.
3.4 Phone standby interface
The display interface after the phone starts normally is as follows:
The phone standby interface can display the phone's time, date, phone status (Do Not
Disturb, Auto Answer), account registration status, extension number, label, and the
labels of the four soft keys at the bottom of the LCD screen. Please refer to the
icon composition
for the description of the icons on the standby interface.
3.5 Check phone status
The phone status contains the following information:
Network information
IP mode
、
IPv4 / IPv6 address
、
subnet mask
、
default gateway
、
DNS server
Account status
SIP account registration information
