LV switch SIP-T780 Скачать руководство пользователя страница 14

Страница: 14 / 117

SIP-T780 IP Phone User Manual

2.Notes for safe use

Please read the safety instructions carefully before installing and using

the phone to ensure safe and convenient use of the phone!



Please use the power adapter specified by the product (supplied with

the package).If you need to use the power adapter provided by other

manufacturers due to special circumstances, please confirm that the

voltage and current of the provided adapter comply with the

specifications of this product (see the connection of power supply

and network cable for details), and it is recommended to use safety

certified products, otherwise it may cause damage to the equipment or

may even cause a fire or electric shock. Before using this product,

please check whether the power cord is damaged. Do not use damaged

power cords and abnormal conditions such as twisted, stretched, or

bundled power cords to avoid fire and electric shock.



Non-technical service personnel must not disassemble or repair the

product by themselves. Improper installation or repair may cause

electric shock, fire and other accidents. At the same time, the

warranty service of your product will also be invalid. If you need

technical support, please contact the agent or your network

administrator .



Keep the temperature and humidity of the product in line with the

working requirements of the product. Make sure that the product is

placed flat on the workbench, and check that the non-slip glue on the

product base does not fall off and cause the phone to slide on the

platform. Please keep away from electrical appliances with strong

magnetic or electric fields, such as microwave ovens or refrigerators,

when placing the equipment. Keep the equipment away from fire sources.



Do not put metal objects such as pins and iron wires into vents or

gaps. Otherwise, it may cause electric shock and other injury

accidents caused by current passing through metal objects. If similar

metal objects fall into the product, stop using it in time.



This product contains small parts inside. When placing the device,

keep it out of the reach of children to avoid accidentally swallowing

Содержание SIP-T780






















































































































Результаты поиска

Содержание SIP-T780

Отзывы:

Похожие инструкции для SIP-T780

Бренды по названию

Популярные бренды

LV switch SIP-T780, Руководство пользователя

Результаты поиска

Содержание SIP-T780

Отзывы:

Похожие инструкции для SIP-T780

Бренды по названию

Популярные бренды