LV switch IPPBX8000, Руководство пользователя

Страница: 96 / 199

LvSwitch IPPBX 8000 Manual
94
In the "PRI trunk" list, click a certain PRI trunk that you want to modify, click the button, and modify the
setup information of designated PRI relay in the popup interface;
Select a PRI relay you wish to remove from the PRI relay list, click the button, and confirm that the
designated PRI relay can be removed.
Add R2 trunk
Before setting, PCM needs to be enabled, and the parameters need to be consistent with the opposite end.
Select "CAS" for the frame, and generally keep the default values for other parameters. Click < add > button
in R2 relay bar, and the page shown in figure 6-31will pop up.
The interface items as following:
Diagram 6-10 New adding R2 trunk
Items Function description
Name
Set R2 relay name, which is referenced in configuration items such as inbound and
outbound route.
Group Relay group number, use the default value.