Adjust the fabric by taking the first rib out of
the guide and winding it up until you have the
desired result.
Adjust the fabric by taking the first rib out of the guide
and winding it up until you have the desired result.
The Solem is now ready for use!
For top mounting, use the cover caps provided to
cover the holes; this prevents dirt from getting into
the guides.
Now put the ribs in the recess of the guides 1 by
1. Make sure the ribs are at the top. (If possible,
put the ribs in from the front.)
Attach the eye for operation in the middle of the rib.
(Hex key 4 mm)
Now slide the Solem out fully and check that the ribs
do not stick.
Attach the guides between the beams. Carefully check
the dimensions between the beams. If necessary, use
filler plates between the guide and the beam.
The ribs are thicker than the guides. In some situa-
tions, filling will be required. For bottom mounting, use
the cover caps provided to cover the holes.
Interposition
Top mount
Bottom mount
No filler needed
Filler needed
