Connecting the LED fixture to the mains:
• Choose the appropriate cordset for the available voltage and branch circuit. Model HGC906336
for 120Vac, 15A, Model HGC906337 for 240Vac, 15A, Model HGC906339 for 277Vac, 15A, or Model
HGC906340 for 277Vac, 20A.
• Make sure the power is switched off.
• Connect the appropriate cordset to the luminaire.
• Ensure the cordset is not coiled and does not touch any hot surfaces.
• Connect the plug of the cordset to the dedicated receptacle according to the local rules, safety
regulations and electrical code.
• Ensure external switching gear can cope with the inrush current of the LED fixture. Do not use
household timers to switch the LED fixture.
• Switch on mains power.
The product is intended to be used in greenhouses and climate rooms. NOT FOR INTRACANOPY USE.
The product may be used in damp environments. The product may not be used outdoors. This lumi-
naire is suitable for operation in an ambient temperature not exceeding 40°C. This should be the max-
imum sustained temperature of the installed environment (ambient temperature) that will ensure safe
operation of the lighting equipment. To prevent sustained temperatures above a 40°C ambient a me-
chanical ventilation or cooling system is required to maintain the temperature within the growing space
at or below 40°C when the luminaire is in operation.
Be sure cord sets or wiring harnesses:
1. Are not concealed or extended through a wall, floor, ceiling, or other parts of the building structure;
2. Are not located above a suspended ceiling or dropped ceiling;
3. Are not permanently affixed to the building structure;
4. Are routed so that they are not subject to strain and are protected from physical damage;
5. Are visible over their entire length; and
6. Are used within their rated ampacity as determined for the maximum temperature of the installed
environment specified in the instructions.
