Manualtuning
Program
SoundSystem
ColourSystem
ManualSearch
Program Lable
AFT
23
DK
Auto
Off
471.43 MHz
Select
Adjust
Auto Tuning
Searching
6
Exit
MENU
ATV
215.00MHz
You can press
LCD-MENU
button to stop auto tuning and close the OSD menu.
Manual Tuning
This option allows you to perform Manual Tuning.
Before you perform Manual Tuning, you must choose the country where you are
by selecting Country option.
Press / to select Manual tuning in SETUP menu.
Press / to perform your selection, the menu of Manual tuning will display on the
screen.
Press ENTER key to start.
Auto Tuning
Press ENTER key to start.
Enter
Return
ENTER
MENU
30
29
Program Label
This option allows you to label a channel, you can also relabel the programs have been
labeled.
Select a channel you want to labeled.
Press / select Program Label in SETUP menu.
Press / to perform your selection. The menu of program label will display as below:
Program
The current program number. Press / to select the upper or lower program.
Sound System
Press / to select a corresponding sound system, such as DK, L/L , BG.
Colour System
Press / to select a corresponding colour system, such as Auto, PAL, SECAM.
AFT (Auto Fine Tune)
Due to weak signals or a wrong antenna configuratio n, some of the channels may not
be tuned to the best reception condition. AFT function allows you to fine tune channel
selected(the frequency of channel is around the value in
Manual Search
option.
Press the numeric buttons to input the numbers directly or press / to select the
letters.
Press / to move the cursor.
Press
ENTER, LCD-MENU
or
EXIT
button to confirm and return to previous menu.
Program Label
This option has two functions:
Set the frequency of channel for AFT option.
Press button for 3+ seconds and it will start auto tuning from this frequency.
Manual Search
Manual Search
-
-
-
.
-
-
MHz
1.
2.
NOTE
1.
2.
3.
4.
5.
6.
1.
2.
