Luxul XMS-1024, Руководство пользователя

Страница: 38 / 40

User Guide
38 © Copyright 2013 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
APPENDIX 1: CoMMoN CoMMANDS
common
commands
description
cmd
Enter„the„command„line„mode„of„a„Windows„system„(applicable„to„
Windows2000„and„higher).„
ipconfig
Displays„the„IP„address„of„the„computer.„(i.e.„ipconfig/all)„„Must„be„
run„from„the„command„line.„
ping
Used„to„test„for„network„availability„and„device/system„recognition.„
Device„sends„a„packet„to„the„target„host„and„asks„for„a„response.„If„
the„device„receives„a„response„from„the„target„host,„it„can„then„see„
the„network„response„time„and„connection„status„between„the„local„
device„and„target„host.„Must„be„run„from„the„command„line.„
netstat
Displays„details„of„current„active„network„connections„including„
routing„table„and„network„interface„information.„Can„also„be„used„
to„count„the„active„network„connections.„Must„be„run„from„the„
command„line.„
tracert
Displays„the„path„taken„by„a„packet„before„reaching„the„target„host„
and„the„specific„time„when„it„reached„each„node.„Similar„to„the„Ping„
command„but„provides„more„detailed„information.„Displays„the„
entire„path„and„IP„address„of„each„node„in„the„path„and„total„elapsed„
tim.„Must„be„run„from„the„command„line.„
APPENDIX 2: TCP/IP ADDRESS SETTING (wINDowS XP)
Select„“Start„Control„Panel„(see„Figure„1).„Select„“Classic„View”„if„you„do„not„see„the„
options„below.
„ „
Figure 1