Quick Install Guide
8
© Copyright 2012 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
IndicatorName
Description
BridgeMode
On
Bridgeisconnected
Flashing
BridgeModeenabledbutnotconnected
Off
TheAPisindefault“AccessPoint”mode.
WLANStatus
On
Thewirelessradioisactiveandwireless
accessisenabled
Off
Thewirelessradioisnotactiveandwireless
accessisdisabled
LANLink/Activity On
ThereisanactiveEthernetconnection
Flashing
IndicatesEthernetactivity
Off
ThereisnoactiveEthernetconnection
Power
On
Thepowerison
Off
Nopower,checkpowerconnections
Atstartup,theGreenPowerLEDwillstayonwhiletheamberLANLinklight
flashes.TheblueLEDwillcomeononcetheXAP-1050wirelessradioisactive.
Reset Button:
TheResetbuttonisusedtoclearthecurrentsettingsoftheXAP-1050andrestore
factorydefaultsettings.
ToRestoretheDefaultSettings:WiththeXAP-1050poweredon,pressandholdthe
Resetbuttonfor15seconds.WhenthePowerLEDcomesonagain,releasethereset
button.TheXAP-1050willbesettofactorydefaults.
CAUTION:
PressingandholdingtheResetbuttonwillremoveany
customconfigurationsdonetotheXAP-1050.
environmental requirements
X
EthernetcabletoprovidePowerandDatatotheXAP-1050.
X
AcomputersupportingTCP/IPandequippedwithaWebbrowser.Supported
WebbrowserversionsincludeMicrosoftIE7.0andup,Safari1.0andup,Mozilla
Firefox1.0andup,andGoogleChrome5.0andup.TheWebbrowserisusedto
configuretheXAP-1050.
X
TheXAP-1050uses36-57VDCpower.ThepowersupplyrequiresAC100V~240V,
50Hz~60Hz.