results may vary depending on building layout, type of construction and other environmental factors
including Wi-Fi traffic, Microwave ovens, Cordless Phones etc.
FCC NotICe:
The use of all radio equipment is subject to regulations in each country. To comply with FCC part
15 rules in the United States, radio equipment must only be used in systems that have been FCC certified. It is the
responsibility of the user/professional installer/operator to ensure that only approved equipment/systems are
deployed. To ensure FCC part 15 compliance, Luxul amplifier products should only be installed in certified systems
by licensed professionals.
FCC Certification Support for oeMs:
Luxul Wireless offers FCC certification assistance and engineering support
for qualified OEM’s interested in certifying complete amplified WLAN systems. Please contact us for details.
LUXUL WIRELESS | 357 South 670 West, Lindon, UT, 84042
p: 801-822-5450 f: 801-822-5460 | www.luxulwireless.com
LUX-QIG-090320101236-PW100FC2
© 2010 Luxul Corp. All rights reserved.
TRoubLEshooTInG
Weak or non-existent coverage.
• Make sure the cables are properly connected and that there is power to the Shock-WAV
Wi-Fi Signal Booster and your WAP (Wireless Access Point).
• If the Signal Booster is powered the Power and TX/RX indicators will be solid green. If
data is passing through the signal booster the TX/RX indicator will be Green with flashing
Red. If there is no indication of data pass through remove the Luxul unit and test with
the WAPs stock antennas to make sure the WAP’s radio is transmitting. If the WAP is not
transmitting check your WAP’s documentation for possible causes.
• Sometimes, WAP’s with multiple antennas have primary and secondary antenna ports.
Be sure to connect the signal booster to the primary antenna port of the WAP as many
secondary ports are receive only, or do not transmit at the same power level as the
primary antenna port. If your WAP has more than one antenna port, try connecting
to a different port and/or, if available, change the administration settings disable the
secondary antenna port. (See your WAP’s documentation).
• Ensure the X-WAV antenna is properly positioned. Directional antennas should face the
direction of the area to be covered. Omni antennas should be centered in the desired
coverage area. Antennas should have minimum of 2 feet (.6 meters) of clearance with
no obstructions.
• The Luxul Wireless Circular Polarized signal is superior for penetrating wood, concrete,
and stucco, but all wireless signals can be disrupted by certain obstructions, including
large metal objects, or strong magnetic fields. Try orienting the antenna where line-of-
sight access to the desired coverage area is available.
After checking the above items, if your Luxul Wireless product still does not seem to be
functioning properly, please contact Technical Support at:
For warranty information please go to:
www.luxulwireless.com/warranty/
