background image

Fold

Fold

Fold

5

 Advanced Configuration

Configuring the Epic 3 as a Wireless Controller

The Epic 3 can manage up to two additional access points to enable 

wireless client roaming and simple configuration. To enable this feature, 
ensure one or two compatible access points are connected to the same 

network as the Epic 3, then select Wireless Controller from the Epic 3 web 
configuration interface. Follow the online help to add the access point(s) to 

the profile.

 

c

Caution:

 Do not manually configure access points you intend to 

manage with the Epic 3 for seamless roaming. Doing so will result in 
standalone AP that the Epic 3 will not find/manage.

Epic 3 as a Controller

Other Advanced Configuration

For more information on configuring advanced features such as DDNS, 
VPN, etc., refer to the support resources at luxul.com.

6

 Hardware Operation

Epic 3 Front Panel LED Indicators

Indicator Name

Status

Function

5GHz

ON

A 5GHz wireless network is 

broadcasting.

2.4GHz

ON

A 2.4GHz network is broadcasting.

1-4 LED

ON

A device is connected to the 
corresponding Ethernet port. 

FLASHING

Data packets are being transmitted 

to the connected device.

Internet 

LED

On

Router is connected to the ISP.

FLASHING

Data packets are being transmitted

USB 

LED

ON

A USB-enabled device is connected 

and configured.

System 

LED

FLASHING

Router is booting.

HEART BEAT Router is operating normally.
OFF

Router is not booting.

Power 

LED

ON

Power is applied to the Router.

OFF

Power is not applied to the Router.

Front Panel

Epic 3 Front Panel View

Rear Panel

Epic 3 Rear Panel View

 

„

Antenna Ports:

 4 RPSMA female antenna ports to connect the  

included antennas.

 

n

NOTE:

  All four antennas should be installed prior to powering up 

the XWR-3150 and are required for optimal performance.

 

„

Power Input:

 Power adapter included.

 

n

NOTE:

  To reboot the router, disconnect the power adapter,  

wait 10 seconds and reconnect the power adapter.

 

„

WAN Port: 

(1) black RJ-45 Ethernet Port for Internet connection.

 

„

LAN 1 - 4 Ports:

 (4) green RJ-45 Ethernet ports for connecting to the  

local network.

 

n

NOTE:

 A Luxul switch is recommended in conjunction with the Epic 

3 to increase the number of local ports available.

 

„

Reset Button:

 Used to restore factory default settings.

 

c

CAUTION:

  Holding the Reset button longer than 10 seconds will 

result in a factory reset.

To restore factory defaults

, press and hold the Reset button until the 

System LED stops flashing (approximately 20 seconds). A factory reset 

will take one minute or more to complete. A successful factory reset is 

indicated when all of the Port LEDs flash once. When the System LED 

starts flashing again, the unit is ready.

 

c

CAUTION:

  Resetting the Epic 3 to factory defaults will remove all 

custom settings.

Содержание Epic 3 XWR-3150









Отзывы: