Page
3
of
5
Setting Up Your Table
1
2
3
4
5
6
1. Release the buckle.
2. Lay the table on its side with four rubber stands on the floor, open up the table with four legs extends
as full as possible. Take out all accessories.
3. Lift the table up until all legs are on the floor, to ensure the cables have all been fully extended, be
cautious not to tangle the cables with the legs or support beams.
4. Put accessories into the corresponding outlets, put on the hanged armrest or sling on the headrest
cradle.
5. Release the side handle and press it in once the headrest is adjusted to the required position.
Remarks: If the headrest is too loose to be locked, press the opposite side of side handle and rotate
the handle in clockwise direction to make it firmer and press it in.
6.
Put on Table Cover if you’d like. Now the table is ready for your use.
Re: The height of table is adjustable by turning off the knobs on the leg and take out the movable leg
to adjust the height by choosing the holes on the movable leg, put back onto the leg and fasten the
knobs firmly. Four legs should be done in the same way one by one and make sure all legs are
a
djusted into same height level. Don’t apply load over 44 lbs (20kgs) on the position headrest cradle.
Remarks: There are 4 wheels for carry bag to be assembled by DIY, follow the guide of assembly
as in separate page.