LUXSAR VS450WZ18, Руководство пользователя

Страница: 67 / 92

22 Manuel_VS450Z18/VS450WZ18_V02_En
F: Focus =I IRIS = B BLC = W WDR
X: 16 digit of preset title
- : not defined
█ : Current cursor position
Follow the steps below to program the Preset positions.
1. Select the camera number by pressing 0 ~ 9 and CAM .
2. Simply press PRST button to enter preset menu. ( MENU => FUNCTIONS =>
PRESET )
3. Select the empty preset location to be programmed by moving the
Joystick up/down. If selected location is not empty, pressing PRST button
will display the predefined position.
4. After selecting an empty position, press and hold SHFT/PGM then use the
Joystick to control the direction of the camera and lens. (Or twist the zoom
handle or press the zoom button to start PTZ control for view selection.)
5. After aiming the camera (view direction and lens control) to a specific
position, release
SHFT/PGM button (or hit the focus button). The selected
location No. field will be filled with A A F F . Move the joystick to the right to
select each Focus/ Iris /BLC/ WDR** mode using zoom handle.
6. Move to the title field to edit/enter the name. Rotate the handle CW and
CCW or press
Tele or Wide button to scroll through the alphanumeric
characters. Moving the handle to right or left to select next or previous digit.
7. To finish entering the title, move the Joystick up/down.
8. Locate the cursor on PREV NEXT item to select the previous/next page of
presets, scroll through the page by moving the Joystick to the Left on PREV
EXT .
9. Repeat the steps 2 through 8 for each additional preset position.
10. Select SAVE AND EXIT by moving the Joystick to the right. Press ESC to exit
the Preset menu without saving.
NOTE:
Press the Home or OFF button at programmed position to delete the
preset.