6
Step 3.
Turn the DEFAULT<->NORMAL switch back to NORMAL (Right), and the
VDRIP10 will reboot itself shortly. The VDRIP10 configuration is now reset to
the factory default.
2.2.
Rear Panel
Items on the rear panel are illustrated in the figure below.
E
Terminal Block Pins 1-16:
To be connected with Alarm I/O,
RS485, or RS232.
F
LAN Port:
The Video Encoder connects to the Local area
network via a standard RJ45 connector.
G
DC 12V Power Jack:
To be connected with the attached
power adapter.
2.3. Quick
Setting
Before connecting the VDRIP10 to the Internet, the users must first
configure the VDRIP10 on the computer. Please follow the steps below to
configure.
Step 1.
Connect Video Encoder to your PC by an RJ45 wire.
Содержание VDRIP10
Страница 1: ...Encodeur vidéo VDRIP10 Version 1 1 ...
Страница 14: ...Video encoder VDRIP10 Version 1 1 ...
