
47
4
. Please refer to the instruction from hard drive manufactory for correct jumper setting
on (master) mode of the hard drive, mounting the hard drive over DVR base by
facing SATA interface to DVR main board. Match screw holes from bottom to bottom
of hard drive and the DVR. Turn over the DVR from top to bottom side and then
mounting up the hard drive by using screws from attached accessory pack as picture
below:
5.
Hooking up SATA cable and power cable to the hard drive as picture below.
6.
Restores top cover then hook up with power and monitor a hard drive status message
appearing if it’s been installed successful.