LuXout Shades LSPP-12V-29A-18S Скачать руководство пользователя страница 2

I N S T R U C T I O N S

LuXout Low Voltage Plug-In

Overview

S P E C I F I C A T I O N   S U B M I T T A L

 Job Name:

 Model Numbers:

Job Number:

1). When Do I Charge The Motor?

•  Our motors are charged when you get them. The charge should last about 500 cycles. (Up-down)

•  When the motor battery gets low on charge, it will beep at you when operating. The beeping will happen until the 

motor stops. Be sure to charge the motor once it beeps at you during operation.

•  Suggestion - Set a renewing calendar event on a set date each year then recharge the motor to avoid beeping.

2).

 

Charging The Motor

•  Plug in the charger into a nearby electrical outlet.

•  Connect the cable from charger to cable that is attached to the motor. The cable is 6’’ long and runs from the motor

to the plug.

•  Charge 3 - 5 hours or until the LED on the charger turns green.

3). What If I Forget And Leave The Charger Hooked Up For An Extended Time?

•  The batteries cannot be over-charged. LuXout motors feature a charge-management circuit that adjusts the amount

of electrical current feeding the battery. As a battery reaches its maximum charge, the circuit will limit the current 

eventually shutting off power once the battery is fully charged.

Red

Light

Green

Light

Battery is 

charged

Battery needs

charging

                              1221 Admiral Street      Richmond VA  23220      800-817-1204     LuXoutShades.com

LuXout

Shades

I-109

Содержание LSPP-12V-29A-18S









Отзывы: