Luxor STANDUP-CF60, Инструкция по сборке

Страница: 2 / 12

2 / 12
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Parts List & Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly and Installation
Assembly of the right and left frame
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Place the crank adjustment housing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Attach the crank adjustment housing
. . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Assembly of the cross bars
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Flip desk upright and attach the crank handle
. . . . . . . . . . . . . . . . . . . . . 8
Fasten the rotating hex rod
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Attach the desk surface
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Finish assembly and tighten bolts
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ATTENTION!
Do not fully tighten screws until completely assembled
TOOLS NEEDED:
Mallet
WE ARE GIVING YOU A STANDING OVATION
You did it! You took the first step towards healthier living by purchasing
our stand up desk. We couldn’t be happier to have you joining the millions
of people who were tired of sitting around and ready to take a stand for a
healthier life .
This desk was built with you in mind and every detail was carefully crafted. The
following assembly guide is best accomplished with two people. If you have any
questions or concerns contact your local dealer .