Luxor LLTSW5-G, Инструкция по эксплуатации

Страница: 10 / 11

MAC - Primary Software Functions Continued
Inspection Password Setting
4.
3.
1.
2.
Choose this function if you wish to change the
inspection password to another password of your
choosing (it can be set to match or be different
than the reset password).
Enter your current inspection password in the
“ Current Inspection Password ” field (if one has
never been set, the default password is 12345678).
Enter a new inspection password in the
“ New Inspection Password ” field (up to 8 digits).
Re-enter the new inspection password in the “ Confirm Inspection Password ” field.
Click “ Run ” (a “Successful” message will pop up if the code was successfully reset).
4 1
2
3
If You Forget a Reset or Inspection Password
1.
2.
3.
4.
5.
6.
7.
Select “
Reset Password Setting
”.
In all caps, type “
HOW DO
” into the
Current Reset Password
field.
In all caps, type “
YOU TURN
” into the
New Reset Password
field.
In all caps, type “
THIS ON
” into the
Confirm Reset Password
field.
Click “
Run
”.
A set of MAC Addresses will be generated.
Provide these to your vendor or retailer.
The vendor will also provide
three sets of
passwords
. Insert them separately into the
Current Reset Password, New Reset Password,
and Confirm Reset Password fields.
Click “
Factory Reset
”.
HOW DO
YOU TURN
THIS ON
2
4
3
1
5
7
6
10
IMPORTANT: If changing a reset or inspection
password, take care to record the password and
store it in a safe place.