LUXO A100DC, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 32

AIM-100™ Operation and Maintenance Manual – 1008189 A03 9
Operation
Safety Precautions
Y
Y
WARNING
Risk of burn During normal operation do not touch any optical surfaces
(e.g. bulb, reflector, window).
Y
Y
WARNING
Fire hazard Do not obstruct any vents or openings.
Y
Y
WARNING Do not use the fixture if, for any reason, it does not appear
to work properly. Instead, alert your Maintenance
Department, or Burton, of observed deficiencies and have
them corrected before continuing to use the light.
Y
Y
CAUTION Do not look directly into the light.
Y
Y
CAUTION In the unlikely event of a bulb exploding, discontinue the use
of the light immediately. To avoid shards falling out, do not
use or move the light until it has been thoroughly cleaned
inside.
W
W
TIPS If a bulb burns out during a procedure, continue to use the
fixture until a replacement can be made. But be aware that
the failed bulb will cause added voltage, which will eventually
lead to premature burnout of the remaining bulbs.
Applying Power
For the wall and ceiling versions, the main power on-off switch is located on the wall
plate.
For the floor stand version, the main power on-off switch is located on the floor stand
base. It is operated by lightly stepping on it.