Luxman PD-171AL, Руководство пользователя

Страница: 14 / 24

12
How to Assemble
5. Pulley cover mounting
Insert four corners slowly and evenly as shown below.
6. Rubber mat mounting
The face with a hollow in the center is the upper side.
Put the rubber mat on the platter by aligning it with the cen-
ter spindle.
7. Dust cover mounting
The dust cover has a plug-in type hinge.
Insert the hinge attached to the dust cover into the hinge
receiver attached to the rear side of the main unit all the way
in a straight manner.
If the acrylic portion of the dust cover is pushed firmly, the
portion may be cracked. Therefore, insert rather than push
the hinge portions at the right and left sides at the same time.