Luxman D-08, Руководство пользователя, Страница: 52 / 54

49
Before You Ask For Repair Services
While the unit is used, an unusual phenomenon may be confused as a malfunction for a certain reason.
Prior to asking us for repair services, please check the table below and read the instruction manual for the subsid-
iary devices.
If the cause of malfunction cannot be identified, please make queries to the purchasing store.
Problem Cause/Solution Ref. page
Power is not turned on. · Connect the power cable to the AC inlet (AC IN) and the
AC outlet frmly.
22
The disc tray comes out even
after the tray is closed.
· Set the disc on the disc tray correctly. 24
· Clean the disc to remove dirt. 2
Playback cannot be performed. · Clean the disc to remove dirt. 2
· Set the disc on the disc tray correctly. 24
· Remove dew condensation from the interior of this unit. 1
· Put the disc on the tray with the label facing upwards.
Settings have been erased. · Settings may be erased when electric power failure
happens or when power supply is shut down due to power
cable disconnection.
Be sure to unplug the power cable after pressing the
OPERATION switch and the “-STANDBY-” disappears
from the display.
46
The remote control cannot be
operated.
· Operate the remote control within the specifed operating
range.
8
· Replace the remote control battery with a new one. 7
· The remote control infrared receiver is exposed to
direct sunlight or strong light sources (such as inverter
fuorescent lights).
Change the installation place or angle to avoid the
exposure to light sources.
8
An electronic device such as a
television malfunctions.
· Some devices equipped with a wireless remote control
receiver may malfunction when the remote control of this
unit is operated. Keep this unit away from such devices.
8
SUPER AUDIO CD PLAYER D-08