Luxman CL-38uSE, Руководство пользователя

Страница: 4 / 20

2
Names and Functions
1. Power switch (OPERATION)
Toggles the power on and off. When wiring or connection
is performed, be sure to turn off this switch. When turning
on the power switch again after turning the unit off, wait for
more than one minute.
(It takes more than 30 seconds for the time mute to be reset
again.)
2. Low frequency selector switch
(frequency / Hz)
Toggles to select frequencies from 150 Hz, 300 Hz, 600 Hz.
For example, when 150 Hz is selected, the frequencies of
150 Hz and lower can be adjusted by the tone control for
bass.
3. High frequency selector switch
(frequency / Hz)
Toggles to select frequencies from 1.5 kHz, 3 kHz, 6 kHz.
For example, when 1.5 kHz is selected, the frequencies of
1.5 kHz and higher can be adjusted by the tone control for
treble.
4. Tone defeat switch (tone defeat)
Toggles to bypass or activate tone controls.
off:
Setting the switch to this position activates the tone
controls and enables the user to adjust preferred
tonal balance.
on: Setting the switch to this position bypasses the
tone control circuit. At this time, operating the tone
control will not change the tonal balance.
5. Low cut switch (low cut)
Toggles the low frequency cutoff function on and off.
off:
Provides the normal state.
on: Cuts low frequencies below 30 Hz at a –6 dB/oc-
tave slope.
* This is useful when the woofers of speakers vibrate due to
the warped record during record playback.
6. Mode selection switch (mode)
Changes the output mode.
mono: Mixes the signals from right and left channels.
stereo: Provides normal stereophonic reproduction.
3 6 9 10 12 11
13 14 15 16 17
7 5 4 1 2 8
Front panel