Luxman CL-1000, Руководство пользователя

Страница: 3 / 20

1
VACUUM TUBE CONTROL AMPLIFIER CL-1000
Precautions
Installation place
Install this unit in a location where good ventilation and heat
radiation are assured.
Especially, installation of this unit where direct sunlight is
present, where the temperature rises excessively high such
as close to a heater, or where it is humid or dusty may cause
a malfunction even if heat is efficiently released.
Therefore, do not install this unit in such places.
Ventilation holes
The ventilation holes of this product must not be blocked be-
cause this unit is a vacuum tube amplifier and generates con-
siderable heat. If the amplifier is installed on a rack or the like,
secure ample space for cooling and leave the door open. Do
not pile up other things on the amplifier and never put articles
on it. Failure to observe this may cause a malfunction.
Note:
For heat dispersal, do not install this equipment in a confined
space such as a book shelf or similar unit.
*
Note
Wall
* *
*
Precautions in connecting with other
components
When connecting this unit to input devices such as a CD
player, an SACD player, a tuner, and an analog record player,
be sure to turn off the power of this unit and all other con-
nected devices. Failure to observe this may generate a strong
noise resulting in speaker damage or cause a malfunction.
The pin-plug to be inserted in each input terminal of this unit
shall be pushed in firmly. If the grounding terminal is inade-
quately connected, noises including hum may be generated,
resulting in an adverse S/N ratio.
The sound is not generated shortly after
the power supply is turned on.
This amplifier is equipped with a time muting circuit in order
to separate the output circuit. Therefore, no sound will be
generated shortly after the power supply is turned on.
If the volume control is set to a high sound level before the
time muting circuit is canceled, a large sound is suddenly
generated. Please be advised that the volume control shall be
set to a low level at first and adjusted after the sound comes
out of the speakers.
Repair and adjustment
When repairs and adjustments are needed, please consult
with the dealer where you bought the unit.
Cleaning
For cleaning, use a piece of soft cloth to wipe the unit such as
cleaning cloth. When the dirt is hard to remove, use a small
amount of neutral detergent to wipe, and then wipe the unit
with dry cloth. Do not use a solvent like benzine or thinner
because such a substance can damage the exterior.
Safety caution
Caution
This unit is heavy. Be careful when unpacking, carrying, and
installation.
This unit is a vacuum tube control amplifier. In the state of the
unit in operation, the main body gets hot. Be careful not to
touch it with your bare skin. For safety, do not use this product
in a place where children or unchained animals are present.