18
DMX Operation
Connecting the Timpani to a DMX Controller
Important!
To connect the Timpani to a DMX controller, use a 5-pin DMX data cable. Do not use
an XLR microphone cable. It will not transfer data to the Timpani.
To avoid interference that can be introduced into the data over long cable runs, use a cable
rated at 24 AWG or lower. Copper shielding, PVC jacket, and a twisted-pair cable will also reduce
interference that can affect data transmission reliability.
1. Connect the DMX output from the controller to the Timpani’s DMX input.
2. If there are no additional lights connected to the Timpani, connect a 5-pin DMX terminator to
the Timpani’s DMX output.
3. If additional lights are daisy-chained to the Timpani, use a DMX cable to attach the next light
in the chain to the Timpani’s DMX output. Be sure to attach a DMX terminator to the last light
in the daisy chain.
Содержание Timpani 1X1
Страница 1: ...USER MANUAL...
Страница 5: ...5 Top 1 Diffuser slot 2 Barndoor slot 1 2...
Страница 29: ...luxlilight com GG2...