Operating modes, sequences and DMX ad-
dress for the ZR30 are set via an 8-position DIP
switch on the side of the lamp.
Selectable-White Mode
Switches: 1000 cccc
Lamp displays calibrated white CCTs
Ballyhoo Mode
Switches: 1011 0bbb
In this mode, the ZR30 will run one of 8 pre-
defined color sequences.
Color-Mixer Mode
Switches: 1010 uuuu
Each internal LED string assigned to a DMX
channel so each color adjusted individually
without using internal blending algorithms.
DMX address is computed as: Address=
((unit x 6) + 1)
Selectable-Color Mode
Switches: 1001 cccc
Lamp displays a single color at full intensity.
DIP Switch Setting
0000
six-color, medium speed
0001
six-color, slow speed
0010
seven-color
0011
salsa
0100
traffic
0101
x-mas
0110
winter wonderland
0111
sunset
0000
No output
0001
Red
0010
Green
0011
Yellow
0100
Blue
0101
Magenta
0110
Cyan
0111
Blended White RGBY - 6500K
1000
B.A. Bastard Amber
1001
Special Lavender
1010
Steel Blue
1011
Violet
1100
Blue-Green
1101
Orange
1110
Tungsten
1111
All White, RGBW - 4000K
MODE
SWITCHES
SETTINGS
Blended-Color, 4-ch DMX512
0uuu uuuu
uuu uuuu = binary unit number
(0…127)
Color-Mixer, 6-ch DMX512
1010 uuuu
uuuu = zero-based unit number (1...15)
Selectable-White, Static CCTs
1000 cccc
cccc = CCT selector
(0…15)
from table
Selectable-Color, Static RGBW
1001 cccc
cccc = Color selector (0...15) from table
Ballyhoo Mode
1011 0bbb
bbb = Ballyhoo pattern selector (0...7)
Orientation
Hold the ZR30 lamp with the lens up and the
screw base down, the switch will be correctly
oriented. A switch shown with the value of
‘1’
is a switch that is in the up position (toward the
lens) and a switch that is shown with a value of
‘0’
is a switch that is in the down position.
Connecting DMX512
The ZR30 includes RJ-45 connectors to inter-
face with a DMX console and other DMX
lamps. A CAT5 cable or XLR is used for con-
trol. A wireless ZR30-AX1 receives DMX from
a Wi-DMX transmitter. When pairing or switch-
ing to wired only mode the ZR30 must first be
reset to factory conditions. See wireless trans-
mitter instructions for details. DO NOT CON-
NECT ETHERNET OR PEO TO RJ-45 INPUT
OR THE LAMP WILL BE DAMAGED!
Blended-Color Mode
Switches: 0uuu uuuu
A ZR30 occupies 4 slots on the DMX512 net-
work.
I
n this mode the ZR30 receives four
DMX512 channels, assigned to Red, Green,
Blue, and White, in that order. Output colors
are expertly blended based on the color re-
quest implied by the DMX512 input levels.
uuu uuuu = Zero-based binary unit number.
The address for the ZR30 is computed as:
DMX512 Address = ((unit x 4) + 1). For exam-
ple: 0000 0001 = DMX 5, 0000 0010 = DMX 9.
‘1’ =
on
‘0’ =
off
See operation guide for full list of DMX settings
0000 No output
1000 4000K
0001 2400K
1001 4500K
0010 2700K
1010 5000K
0011 2850K
1011 5600K
0100 3000K
1100 6500K
0101 3250K
1101 Half RED
0110 3500K
1110 Half BLUE
0111 3850K
1111 Max White
Used to set DMX and modes
