Luxier
SP05-SS
Rev. A3 092016
9
Installation (cont.)
7. Hang the unit on the wall to complete the
installation. Make sure the unit is seated prop-
erly. Apply silicon sealant on left and right
sides of the shower panel. (
NOTE:
do not seal
the bottom of the panel, this will allow any
possible future leaks to drain out the panel)
8. Connect hand shower hose to the main
panel body. Attach the hand shower to the
hose. (
NOTE:
Install the rubber washer to
prevent leak.)
9. Place the hand shower cradle at desired lo-
cation (preferably on the left side of the panel)
and follow step 4 when drilling and mounting
the cradle.
