4
KTS14 Rev. B 04/2018
Luxier USA
B
C
A. Shut off water supply at the valves.
Remove old faucet and clean the mounting
surface for installation of new faucet.
F. Turn on water supply to check for leaks at
all connection. Remove spray head from the
pull out hose and let the water run for about
1 minute and check for leaks. Reattach the
spray head.
E1. Apply Teflon (TPFE) tape on the shut off
valves. Thread the tape in counter-clockwise
direction.
E2. Use Wrench to tighten the water supply
hoses, please do not overtighten the con
-
nections.
B. Based on the sink configuration, use the
deck plate (24) or the flange (23) as the
base for the faucet. The mounting hole on
the surface should be 1 1/2” in diameter.
C. From under the sink, install the rubber
washer (19), metal washer (20) and lock
-
ing nut (21) to the shank (17). Tighten the
nut to secure the faucet to the mounting
surface. Use the 2 screws to lock the locking
nut in place
E1
Flexible water supply line
E2
01. Handle
02. Screw
03. Temperature Indicator
04. Cap
05. Bonnet
06. Cartridge
07. Seat
08. Body
09. Spout Connector
10. Spout
11. Plastic Guide
12. Check Valve
13. Sprayer
14. Outlet Hose
15. Water Supply Hoses
16. Pull Out Hose
17. Shank
18. O-Ring
19. Rubber Washer
20. Metal Washer
21. Locking Nut
22. Counter Weight
23. Flange
24. Deck Plate
A
Installation
D
D. Install counter weight (22) onto pull out
hose (16). Connect the pull out hose to
water outlet tube (14). Do not overtighten
the connection.
F
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
