4
BSH07S Rev. A 07/2018
Luxier USA
Installation
B
C
A. Shut off water supply at the valves.
Remove old faucet and clean the
mounting surface for installation of new
faucet.
D1. Apply Teflon (TPFE) tape on the
shut off valves. Thread the tape in
counter-clockwise direction.
F. Remove aerator from the spout and
let the water run for about 1 minute to
clear any debris in the plumbing system.
Attach the aerator.
D2. Use a wrench to tighten the hoses,
please do not overtighten the connec-
tions.
E. Turn on the water supply to check for
leaks at all connections.
B. First place the new faucet through
flange on the mounting surface. The
faucet hole should be 1 3/8” in diameter
on the mounting surface.
C. Attach the mounting rod to the
faucet. Insert the rubber washer, metal
washer, and secure the faucet with the
mounting nut.
D1
Flexible water supply line
D2
E
F
A
01. 2.5 mm Allen wrench
02. Setscrew
03. Handle
04. Cap
05. O Ring
06. Bonnet
07. Cartridge
08. Body
09. EVA Washer
10. Rubber Washer
11. Metal Washer
12. Mounting Rod
13. Aerator
14. Water Supply Hoses
(non-
removable)
1
2
3
4
5
6
7
14
8
13
9
10
11
12
