LXMH10002
V. 01 – 03/12/2015
15
©Velleman nv
17
20
16
19
colour F
0
3
black
4
243
continuous colour
244
245
red
246
247
green
248
249
blue
250
251
white
252
255
all colours
18
21
17
20
control
0
7
normal
8
15
reset all
16
23
pan and tilt reset
24
31
TBD
32
39
TBD
40
47
TBD
48
55
TBD
56
63
display off
64
71
display on
72
79
TBD
80
87
TBD
88
95
hibernation
96
255
TBD
7.
Unique Features
7.1
RDM
The Remote Device Management allows the user to control the device from a distance. Every single
device features a unique RDM code. It is suggested not to change this code.
7.2
Software Upgrade
New software can be uploaded into the device through a DMX cable and an upgrade box. The upgrade
box is not included. Please contact your dealer for more information.
7.3
Hibernation Mode
The device enters the hibernation mode if it is switched on but does not receive any DMX signal. The
device will return to normal mode as soon as a DMX signal is received.
7.4
Reverse Display
Simultaneously hold the UP and DOWN buttons pressed for 3 seconds to flip the display.
8.
Cleaning and Maintenance
All screws should be tightened and free of corrosion.
The housing, the lenses, the mounting supports and the installation location (e.g. ceiling, suspension,
trussing) should not be deformed, modified or tampered with; e.g. do not drill extra holes in
mounting supports, do not change the location of the connections…
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
Do not immerse the device in any liquid.
There are no user-serviceable parts, apart from the fuse.
Contact your dealer for spare parts if necessary.
Replacing the Fuse
Only replace the fuse by a fuse of the same type and rating.
1.
Before replacing the fuse, unplug the mains lead.
2.
Unscrew the fuse holder with an appropriate screwdriver.
3.
Remove the old fuse and install the new fuse in the fuse holder.
4.
Place the fuse holder back in the housing and tighten it.
