LX119
V. 01 – 19/06/2014
9
©Velleman nv
10
000
10
no function
011
60
auto programme 1
061
120
auto programme 2
121
180
auto programme 3
181
240
auto programme 4
241
255
auto programme 0 (auto 1-4)
11
000
255
auto speed slow-fast
12
000
51
preset dimmer speed from control panel
052
101
dimmer speed mode off
102
152
dimmer speed mode 1 (fast)
153
203
dimmer speed mode 2 (middle)
204
255
dimmer speed mode 3 (slow)
7.11
White Balance
Enter this option to adjust the white balance.
1.
Press MENU until <WHITE BALANCE> appears on the display. Press ENTER to confirm.
2.
Select the colour (R, G or B) with UP or DOWN and press ENTER to confirm.
3.
Set the value (000-255) with UP or DOWN. Press ENTER to save the setting.
4.
Press MENU to go back.
7.12
Fixture Settings and Information
Dimmer
Selection of the dimming curve.
1.
Press MENU until <DIM MODE> appears on the display. Press ENTER to confirm.
2.
Select the dimming curve (off, DIM1, DIM2 or DIM3) with UP or DOWN and press ENTER to confirm.
3.
Press MENU to go back.
BackLite
Activation of the display backlight.
1.
Press MENU until <BACKLITE> appears on the display. Press ENTER to confirm.
2.
Select the activation time (on, 10s, 20s or 30s) with UP or DOWN and press ENTER to confirm.
3.
Press MENU to go back.
Auto Test
Start the automatic test function to check if the device is working properly.
1.
Press MENU until <INFO> appears on the display. Press ENTER to confirm.
2.
Select <AUTO> with UP or DOWN.
3.
Press ENTER to confirm and to start the automatic testing.
FixHours
Shows the device’s working hours.
1.
Press MENU until <INFO> appears on the display. Press ENTER to confirm.
2.
Select <FIXHOURS> with UP or DOWN and press ENTER to confirm.
3.
Press MENU to go back.
Version
Shows the device’s firmware version.
1.
Press MENU until <INFO> appears on the display. Press ENTER to confirm.
2.
Select <VERSION> with UP or DOWN and press ENTER to confirm.
3.
Press MENU to go back.
Temp
Shows the device’s working temperature.
1.
Press MENU until <TEMP> appears on the display. Press ENTER to confirm.
2.
Press MENU to go back.
