13.
Working time
Press
MENU
button to
, press
ENTER
button
，
the led display could show
the working time, press
MENU
back to main menu.
14.
Version
Press
MENU
button to
, press
ENTER
butoon
，
the led display could show
the software version,
press
MENU
back to main menu.
VI. How to operation
1. Master/slave mode to control.
2. DMX controller
Master/slave mode function
All light is master at the beginning
,Connect the lights, One to be master
and the other is slave. If there are no DMX signal, the master mode LED will light
up, the sound control LED will strobe according to the music, the other light will
readjustment the master light. when connect the DMX cable, the slave LED will
light up.
Two Light
For the slave light, slave 1
（
）
running same as the master light
，
slave 2
（
）
running against the master light. If there are just two light, could set the
second light as slave light
（
）
for better show.
D
MX Controller
If control by DMX controller, then you need to set the address code to control the
light, the address code value is 1-512, the light could receive the signal
accordingly.
Press MENU button
，
select
menu, press ENTER button
，
address will
strobe.Use UP /DOWN to select DMX512 address. After address ensure
，
press
ENTER button
，
until address stop strobe, After 8 seconds will return the menu. If
return the former but not change, press the menu button.
