Luxia Poly 1000, Руководство по эксплуатации и обслуживанию

Страница: 31 / 132

POLY 1000/1500/2000
Operating and service manual
pag. 31 di 132
English
4 - SAFETY DEVICES
The machine is equipped with the following
safety devices:
1)
Thermal cutout for pump protection.
2) Safety thermostat.
3) Microdoor ( a ).
a
3 - WORKING SAFETY
The kiln has been designed and built in conformity with directives:
• The Directive 98/37 CE of the European Parliament and Council , dated the 22
nd
June 1998.
• The Decree of the President of the Italian Republic dated the 24
th
July 1996, n.459
• The Directive 73/23/EEC , and subsequent modifications, implemented by the Italian State
government, with the Law of the 18
th
October 1977, n. 791 and subsequent Decree Law of the
25
th
November 1996, n. 626
• The Directive 89/336/EEC , modified by the Directive 92/31/EEC, implemented by the Italian State with
the Decree Law of the 4
th
December 1992 n. 476.
• The Directive 2002/95/CE RoHS of the European Parliament and Council , dated the 27-01-2003
and subsequent modifications
However, we may,be considered at your disposal to clear any doubts that may arise during the use of
the machine and to supply any further information that may be needed.
The machine must be used only by personnel suitably trained for the purpose and that has carefully read
the contents of this publication.
Only operators with the appropriate age can be admitted to the use of the machine; they must be in
perfect psycho-physical condition, of proven aptitude and capacity and provided with the necessary
notions for operation and normal maintenance of simple mechanical and electrical components.
To use the kiln better, respect the following instructions:
• Install the machine in compliance with the instructions found in the paragraph “Installation”.
• Install the machine in an area out of reach of the personnel not authorised to operate it and
especially out of thereach of minors.
• Use the machine with great care and never be distracted.
• Do not wear ample clothing or clothing with wide and open sleeves.
• Do not let anyone approach it during use.
• Do not remove, cover or modify the identification plates placed on the machine body.
• Do not remove the protections and do not modify or bypass the mechanical and electrical protection
devices.
• Work on the products permitted only and not on other types.
• Do not use the machine as a working top and do not place any objects on it that do not pertain to the
normal working operations.
• Do not use the machine with electrical connections of the temporary type, with temporary or
non- insulated cables.
• Periodically check the state of the power cable and the cable clamp on the machine body, replace it
as soon as is necessary and have it done by qualified personnel.
• Stop the machine immediately as soon as there is defective, or abnormal operation, a breakage is
suspected, there are incorrect movements, unusual noises.
• Before cleaning or carrying out maintenance, disconnect the machine from the electricity mains.
• Use protection working gloves for cleaning and maintenance.
• For all extraordinary maintenance consult the manufacturer or qualified or authorised personnel.
• Do not aim high-pressure jets of water at the kiln.
• When sharp accessories are manipulated, use cut-resistant gloves.
• Durante la manipolazione di accessori taglienti, utilizzare guanti resistenti al taglio.