Website:
www.luxielectronics.com
Email:
Phone: +1 (949) 654-2047
Address: Irvine, CA, USA
Document name: HHT-100 user manual
Revision: 1.01
Date: 8/29/2012
Specifications are subject to change without notice
Product Specification
Part Number: 75-001-01
HDMI hand held tester
Model: HHT-100
Product Image
Product Drawing
Features and Benefits
>World’s first HDMI hand held cable continuity tester with
full HDMI 1.4 support including HDMI Ethernet/Return Audio
>Measuring all 19 HDMI wires including the Ethernet/Return
General
Audio wires in one quick step, display all status via 9 LEDs
Connector type:
>Separated transmitter and receiver design for testing the
Transmitter: 1 HDMI Type A, 1 HDMI Type C, female
long cables installed in wall between rooms
Receiver: 1 HDMI Type A, 1 HDMI Type C, female
>Can test both regular HDMI cables with Type A connectors
Testing method: wire continuity test
and mini HDMI cables with Type C (or Type A) connectors
Where to apply the product: Tx & Rx on each end of cable
>Rugged plastic enclosures with rubber jackets for durability
Power: 2 AA batteries on the Tx (not included) only
>Powered by two long lasting and easy to find AA batteries
Warranty: 3 years limited
Mechanical
Package
Dimension without rubber jacket (Tx or Rx):
1 transmitter and 1 receiver in a cardboard package box
3.5" (89 mm) x 2.4" (62 mm) x 1.0" (25 mm)
Box length: 6.2" (157 mm)
Dimension with rubber jacket (Tx or Rx)
Box width: 3.9" (100 mm)
3.8" (96 mm) x 2.8" (70 mm) x 1.3" (34 mm)
Box height: 1.5" (39 mm)
Type A and Type C female connectors, per HDMI specs
Net weight: 0.44 lb (198 g)
Master carton of 20 testers
Size: 13.0" x 9.0" x 8.7" (330 x 230 x 220 mm)
Weight: 9.9 lb (4.5 kg)
Other Related Products
Electrical
HDMI DIY connectors and clamshells, 10 sets
Supported formats: HDMI 1.4 with HEAC, HDMI 1.3, 1.2
Regular: P/N 68-009-01; Ribbon: P/N 68-010-01
Test method: DC continuity test
Test connection for CEC, EDID Clk, EDID Data, +5V wires
Testing pin to pin of each individual wire
Total 4 LEDs for 4 wires
Test connections for 4 TMDS pairs and HEAC pair
Hand tool, P/N 68-007-01, model DIY-28T
Loop pair +, - and drain wires in the same pair
Testing the looped 3 wires
Total 5 LEDs for 5 pairs
HDMI raw cable spool in a box, available in 2 lengths
250' (76 m): Regular: P/N 22-001-02; Ribbon: P/N 22-002-04
Note: If a drain wire is not properly connected and
500' (152 m):Regular: P/N 22-001-03; Ribbon: P/N 22-002-05
grounded with its own pair (e.g. grounded with other pair
or all drains together), the tester would fail that pair
Typical current thru each wire during test: 5 mA
Max test cable length: 700' (220 m) on 30 AWG cables
Battery life: in typical use (100 tests each day, 2 seconds
each test), close to battery shell life