Product Name:
Cement Pedestal Two Tier Bowl Outdoor Fountain
SKU #:
WHF909
Contact: [email protected]
Instruction Manual
SAVE THESE INSTRUCTIONS
–This manual contains important
safety and operating instructions for power units.
•
Add clean water periodically to ensure that the pump is fully submersed in water.
•
Disconnect the power and empty the basin if the fountain will not be used for an extended time.
•
If installed outdoors and in a freeze-area of the country, ensure that all water is removed and the unit is
completely dry.
This product is NOT to be operated below 41
℉
(5
℃
) freeze damage may occur.
Special Warnings and Cautions:
CAUTION:
•
The pump has been evaluated for use with water only.
•
Do not use the pump in water exceeding 35ºC / 95ºF.
•
Do not use the pump in flammable liquids.
•
Do not use the pump for industrial purposes.
•
Do not use the pump in vehicles or on ships or aircraft or swimming pools.
•
Do not use the pump in location where special conditions prevail, such as the presence of a corrosive or
explosive atmosphere (dust, vapor or gas).
•
Do not let the pump run dry. Pump must be completely submerged for proper operation and cooling.
•
Do not lift the pump by its power cord.
•
Keep the plug dry. Do not expose the plug to water or steam.
•
Before connecting to the power source, make sure that the pump is assembled and completely submerged in
water.
WARNINGS:
•
To reduce the risk of electric shock, connect only to a properly grounded, grounding type receptacle.
•
To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any
dimension.
•
Do not exceed the voltage shown on the pump.
•
Always disconnect the pump from the power source prior to beginning any maintenance or work on the pump
or fountain.
•
Inspect the power cord for damage before installation and/or maintenance. Replace the entire pump if
damage is found.
•
For pumps with a 3-prong, grounded type plug, do not remove the grounding pin from the plug on the power
cord.