6
Now connect the motor housing plate to the bracket using the bolts provided, again make sure the control ribbon
is passed through the hole
Now connect your ducting pipe to the underside of the bracket, and then connect your ducting
to the top of the motor housing
Maximum ducting run is 6 meters to the outside wall
Fitting the charcoal filter ( only to be used if you are not ducting to the outside
You need to position your motor outlet
ducting either front, back, left or right
depending on the position of your
outside wall. connect the cable to the
motor housing
remove the two screws as shown,
slide out the bracket, insert your filter
and replace the two screws,
These filters will need replacing every
three months, do not wash them,
replace them