Luxair LA-CAN-TORNIA, Инструкция по установке и использованию

Страница: 9 / 9

■
Press the push button to confirm the speed in which the interval function will be
activated.
Deactivate: you can deactivate pressing any push button but not the light push button.
AUTOMATIC CONTROL OF GREASE AND CARBON FILTER
The electronic controls with led points allow automatic control of the grease filters and carbon
filters (only in case the hood is used in filtering version) so that the user does not have to
remember when maintenance was last carried out.
When the grease filters require
cleaning, an acoustic signal is
issued and the led point 1 keeps
on on flashing. When the carbon filters need
replacing, an acoustic signal is
issued and the led point 4 keeps
on flashing.
TO RESET THE GREASE AND CARBON FILTER TIMER FUNCTION
To put the grease filter or carbon filter counter back to zero you must:
■
stop the motor;
■
press the push button, until you hear the acoustic signal.
To confirm reset the led point stops flashing.
CHANGING OVER FROM NORMAL VENTILATION TO RECIRCULATION MODE
The hood is delivered standard for normal ventilation.
If you wish to use the hood in recirculation mode do as follows when motor is off:
■
Press the push button for more than 4 seconds.
If the hood is set for recirculation
use the 4th led is switched on for
5 seconds. If the hood is set for normal
ventilation the first led is
switched on for 5 seconds.
During the normal ventilation/recirculation setting phase no function can be activated.