LuxaFlex EasyRise Duette, Установка Эксплуатация Уход

Страница: 6 / 24

INSTALLATION
4
Mount the Installation Brackets — Reveal Mount
■ ■
Measure 50mm from each jamb for bracket location.
■ ➤
If more than two installation brackets came with your order, space additional bracket(s)
evenly between the two end brackets and mark their location. Mount into wood whenever
possible.
■ ■
Centre the brackets on your marks and mark the location of the screw holes.
■ ➤
The minimum casement depth for mounting the installation brackets is 10mm. With shallow
casement depths, mark both of the winged screw holes.
■ ➤
The minimum casement depth for a fully recessed mount is 60mm for 10mm and 20mm cell
sizes and 75mm for the 30mm cell size. Mark the centre screw hole when depth permits.
IMPORTANT: The front edges of the brackets must be level and aligned to each other.
■ ■
Drill the screw holes using a 3mm drill bit.
CAUTION: Use drywall anchors when mounting into drywall.
■ ■
Use a level to check that the mounting surface is level. Shim the brackets if necessary.
■ ■
Attach the installation brackets using the screws provided.
Proceed to “Install the Shade” on page 7.
Minimum
10mm
Use Centre Hole
When Depth Permits
50mm Space Evenly
Jamb Jamb
Space Evenly 50mm
18.019.008-DUETTE-EASYRISE-INSTALL.indd 4 4/06/2019 10:51:50 AM