Lux Tools 345 707, Оригинальное руководство пользователя

Страница: 27 / 84

27
►
P. 5, item 9
1. Press the switch-on safety lock (18) and keep it
pressed.
2. Actuate lever (19) of the spray gun
• The high-pressure pump starts running as soon
as you operate the hand-held spray gun.
• The high-pressure pump stops running as soon
as you release the lever on the hand-held spray
gun.
– Switch the machine off when interrupting your
work for extended periods of time.
Use in combination with cleaning agents
– Switch the machine off.
– Insert the jet pipe with the fan-type jet noz-
zle (12).
– Remove the cleaning agent container (4) from
the holder.
– Fill the storage tank (4) with cleaning agent.
– Place the container in the holder and close the
lid.
– Set the jet pipe by adjusting the nozzle (20) to
low pressure (
►
P. 5, item 10).
– Switch on the machine.
– Spray the cleaning agent onto the dry surface
and let it soak (do not let dry).
– Set the jet pipe by adjusting the nozzle (20) to
high pressure (
►
P. 5, item 10).
– Use the high-pressure jet to rinse off any loos-
ened dirt.
Cleaning and maintenance
Overview of cleaning
Regularly, depending on conditions of use
Cleaning the water filter
– Remove the plug-in coupling for the water con-
nection.
– Remove the water filter from the plug-in coupling
and clean using water.
– Remove contamination from the nozzle opening
using the needle provided and flush from the
front with water.
Clean the high-pressure jet nozzle
– Clean the nozzle by carefully inserting a needle
provided, or a thin and sharp instrument (i.e.
paperclip) into the nozzle to rid it of debris. Any
fine debris will cause the nozzle hole to become
clogged.
– Flush the debris out of nozzle by back flushing
(running the water through the nozzle backwards
or from the outside to the inside).
– Make sure all the debris have been cleaned or
knocked out of the nozzle.
Storing, transport
Storing
– Store the machine where it is dry and well venti-
lated.
– When placing the machine out of service for an
extended period of time, remove the cleaning
agent and drain all the water left in the hoses.
Transport
– If shipping, use the original packaging wherever
possible.
Malfunctions and troubleshooting
In the event of a malfunction…
Malfunctions are often caused by minor faults. You
can easily remedy most of these yourself. Please
consult the following table before contacting the
vendor. You will save yourself a lot of trouble and
possibly money too.
Note:
add cleaning agents only in low-
pressure mode.
DANGER! Risk of injury!
Before carrying
out any work on the product, ensure that
the mains plug is pulled out of the mains
socket and the product is depressurised.
What? How?
Clean the machine. Wipe the unit with a
slightly damp cloth Do
not clean the machine us-
ing a high-pressure water
jet.
Clean the high-pressure
jet nozzle.
►
Clean the high-pres-
sure jet nozzle – p. 27
NOTICE! Risk of machine damage!
Fro-
zen residual water may damage the
machine! If there is a danger of frost, store
the machine including all accessories in a
place protected from frost.
DANGER! Risk of injury!
Improperly con-
ducted repairs may prevent your machine
from working safely. Such repairs will
endanger you and your surroundings.
Fault/malfunction Cause Remedy
Machine is not running. Machine is faulty? Contact your local vendor.
No mains voltage? Check cables, plug, socket and
fuse.
On/Off switch set to
[0]
? Switch on the machine.
No or only little pressure is built up. Air in the system? Ventilate the machine! Run the ma-
chine without the high-pressure
hose connected until water starts
leaking without bubbles. Re-attach
the high-pressure hose.
GB
Hochdruckreiniger_345707.book Seite 27 Freitag, 25. November 2016 2:54 14