background image

BATTERIES/MAINTENANCE

The PSP300 comes with (2) G13A size 1.5V Alkaline Button

Cell Batteries.  During normal use, these batteries are used
for the clock only.  However, they also serve as backup
power to retain your programs and settings if you unplug it
from the wall.   These (2) batteries will need to be changed
once every year.  The thermostat will alert you when the bat-
teries are low by displaying "LO BATT" in the display.

BATTERY INSTALLATION

1. Remove fresh batteries from their carton.
2. Remove the thermostat from the electrical outlet.
3. Use a small regular screwdriver to remove the battery car-
tridge from the back of the thermostat.  Use the small regular
screwdriver to remove the 2 batteries from the holder.

3. Select one of the 9 values the 

UP/DOWN buttons.

4. [1] is the maximum comfort setting (narrow control).
[9] is the maximum energy savings setting (wide control).
5. Press 

NEXT

TEMPERATURE DISPLAY FORMAT

● 

This feature allows you  to display temperature in either

degrees C or degrees F.

● 

To toggle the display mode from Fahrenheit to Celsius or

vice versa press and release [

NEXT] and [HOLD] simultane-

ously in <

SET WEEKDAY PROGRAMS> position.

4. Remove the used batteries if present and replace them
within 90 seconds to avoid having to reset the day and time.
5. Install two new G13A size 1.5V Alkaline Button Cell
Batteries batteries.  Observe the polarity marking (pictures)
shown on the battery cartridge.
6. Push the battery compartment back into the PSP300 while
lining up the arrows.
7. Plug the thermostat back into the wall.

TECHNICAL ASSISTANCE

If you have any problems installing or using this thermostat,

please reread the instructions carefully.  Answers to many
questions can be found in our online technical support at

www.luxproproducts.com If you feel you require assis-
tance, please call our offices between 8:00 a.m. and 4:30
p.m. Eastern Standard Time, Monday through Friday.

Our number is (856) 234-8803 or you can email us directly

at: 

[email protected]

WARRANTY

Limited Warranty:  If this unit fails because of defects in

materials or workmanship within one year of date of original
purchase, LUX will, at its option, repair or replace it.  This
warranty does not cover damage by accident, misuse, or fail-
ure to follow installation instructions.  Implied warranties are
limited in duration to one year from date of original purchase.
Some states do not allow limitations on how long an implied
warranty lasts, so the above limitation may not apply to you.
Please return malfunctioning or defective units to the dealer
from which purchase was made, along with proof of pur-
chase.  Please refer to 

Technical Assistance before return-

ing thermostat.  Purchaser assumes all risks and liability for
incidental and consequential damage resulting from installa-
tion and use of this unit.  Some states do not allow the exclu-
sion of incidental or consequential damages, so the above
exclusion may not apply to you.  This warranty gives you
specific legal rights and you may also have other rights,
which vary from state to state.  Applicable in the U.S.A. only.

DAY

PERIOD

HEAT

COOL

TIME

TEMP.

TIME

TEMP.

MON.

MORN

THRU

DAY

FRI.

EVE

NIGHT
MORN

SAT.

DAY

and

EVE

SUN.

NIGHT

PROGRAMMING CHART

The chart below is provided for you to write down your exist-
ing Weekday and Weekend program times and temperatures
in case you have to enter them again at a later time.

Содержание LuxPro PSP300 Series







Отзывы: