Luvion Platinum 4, Инструкция по эксплуатации

Страница: 8 / 44

8
display and the monitor starts to search for the camera.
3.1.4. Press and hold the Lullaby button on the camera
3.1.5. Push the on/off slide on the camera upwards (to the ON position) while holding the
Lullaby button on the camera, the green light on the camera will blink.
3.1.6. When the monitor and camera are paired, the green pairing succesfull screen will
appear on the display of the monitor and the link light will light up green on the
monitor.
3.1.7.
The baby monitor is now ready for use.
HOW TO USE THE PLATINUM 4
4. SWITCHING ON THE MONITOR AND CAMERA
4.1.1. Switch on the camera and switch on the monitor
4.1.2. After pressing the power button, the display on the monitor goes on, the linking image
appears on the display and the connection indication light lights up red. The monitor
starts to search for the camera. When the monitor and camera are linked, the link light
lights up green on the monitor and connection status bars appear on the display.
4.1.3. When the camera is switched off or out of range the parent unit will show the out of
range image. If no connection can be established, the link light will turn red, the
monitor will beep three short beeps every 20 seconds and the out-of-range image
1
2
1
2