6
USING THE SOOTHER THERMOMETER
1. Remove the protection cap from the soother.
2. Press the power button. The display will read “188.8E,” confirming that the
thermometer is working.
3. Place the soother in the baby’s mouth.
The measurement starts when the screen displays “Lo °C“ or “Lo
°F“. During measurement the symbol “°C“ or “°F“ will flash while the
temperature increases. When a maximum value is reached (after approx.
3 minutes’, the symbol “°C“ or “°F“ will cease to flash. A buzzing sound
indicates that the measurement is finished.
Note:
It is reccommended to leave the soother thermometer in the baby´s
mouth for 6-8 minutes to allow the soother to warm up and to get a more
accurate measurement.
- When the display reads “Lo °C“ or “Lo °F“ then the measured
temperature is below 32.0°C/ 90 °F
- When the display reads “Hi °C“ or “Hi °F“ then the measured temperature
is above 43.0°C/ 109.9 °F
Note:
Drinking or eating prior to use may affect the temperature reading.
Wait half an hour before taking a measurement.
4. Press the power button to switch off the soother thermometer.
Note:
The thermometer will automatically switch off after 10 minutes.
Switch the thermometer off directly after use to prolong battery life.
RECALL THE LAST TEMPERATURE
To recall the last temperature:
Press and hold the power button while turning on the soother thermometer
