manualshive.com logo in svg

Lütze LION Series, Руководство по эксплуатации

Поделиться
Скачать
Lütze LION Series Скачать руководство пользователя страница 10

LION I/O Modules 

▪

 Safety

10

3

Safety

3.1

Related Documents

The modules are always operated with other LION modules.

3.1.1

System Description – Safety Manual

The system description contains safety relevant information about the LION 
System. It is very important to read and understand the manual before working 
with and on the products. 

3.1.2

Bus coupler 

The bus coupler instruction contains important information about the handling and 
configuration of the bus coupler and the communication with the I/O modules.

3.1.3

Infrastructure Components

The instruction of the infrastructure components contains important information 
about the supply of the system and the structure.. 

3.2

Intended Use

The infrastructure components are designed for the exclusive use in railway 
vehicles, as a power supply and line coupler of the LION system.

The intended use also involves the use according to the operation instructions.

3.3

Recepients

The operating manual addresses planers, project managers and programmers. It 
also addresses the operating employees who are responsible for the initial 
operation, the operation and for the maintenance of the products and systems. 
Regarding the employees, three qualification levels are differentiated. 

Risk of injury and property damages caused by non observance of the 
related documents. 

▪ The manual of the components is insufficient if operating  in a system with 

other modules. 

▪ To avoid injuries and damages also read the related documents before 

planning the system.

The system description – Safety manual and the manuals for the Lütze bus 
coupler and infrastructure components can be found on: 

www.luetze-

transportation.de 

Danger of life, serious injuries and property damages caused by a unsafe 
system. 

Use the modules only for 

▪ the listed cases and according to the system architecture.

▪ with external devices recommended and allowed by Lütze Transportation 

GmbH.

Содержание LION Series




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды