2
SVQ-2W, SVQ-2WRL
Status
Indicator
LEDs
*
Infrared Receiver available on SVQ-4WRL-IR only.
** Raise and Lower buttons only available on SVQ-2WRL, SVQ-3WRL, SVQ-4WRL-IR, and SVQ-5WRL only.
SVQ-2WD
SVQ-3W, SVQ-3WRL
Open button
Preset button
Close button
Open button
Preset 1 button
Preset 2 button
Preset 3 button
Close button
Open button
Preset button
Close button
Open button
Close button
Raise/Lower**
Open button
Close button
Open button
Close button
SVQ-3WD
Preset button
Close button
Raise/Lower**
Open button
SVQ-4WRL-IR
SVQ-5WRL
Open button
Preset 1 button
Preset 2 button
Close button
Infrared Receiver*
Raise/Lower**
Raise/Lower**
Installation Instructions
Occupant Copy
CAUTION
!
Lutron recommends that Keypads be installed by a qualified electrician.
Do not connect high-voltage power to low-voltage terminals.
Improper wiring can result in personal injury or damage to
the control or to other equipment.
Keypads must be connected to the
Sivoia QED
™
Electronic Drive Unit (EDU) by using Class 2/PELV wiring methods per the
National Electrical Code
®
. Check with your local electrical inspector for the local code requirements and wiring practices
allowed in your area.
Use only a cloth with warm water and mild soap to clean faceplates (no chemical cleaners).
Keypad Configurations
Non-insert version shown. Insert version also available.
