2)Use the " Button " ( 3-5, Fig. 1 ) and the "
▼
▲
Button " ( 3-6, Fig. 1 ) to adjust the desiring " Alarm
low value ".
Remark :
* When adjust the value, the " SV indicator " ( 3-3, Fig. 1 )
will light.
Alarm high Value Setting
1)After set the " Alarm low value ", press the " Set
Button " ( 3-4, Fig. 1 ) twice, the " Display " will show
" ALHi ", now the meter is ready for " Alarm high value "
setting.
2)Use the " Button " ( 3-5, Fig. 1 ) and the "
▼
▲
Button " ( 3-6, Fig. 1 ) to adjust the desiring " Alarm
high value ".
Remark :
* When adjust the value, the " SV indicator " ( 3-3, Fig. 1 )
will light.
4-4 2nd layer setting procedures
tyPE
Sensor type
FiLt
Digital filter
CtHy
Control hysteresis set
ALHy
Alarm hysteresis set
oFSt
Offset adjustment
GAin
Gain adjustment
Unit
Unit set
9