Lutron Electronics myRoom, Руководство по эксплуатации и обслуживанию

Страница: 12 / 13

11
Operations and Maintenance Manual
®
Section 7:
Maintenance Requirements
Maintenance
Lutron
R
products are designed to have minimal maintenance requirements as detailed below:
Processors
Clean the front cover as needed.
Wall Controls and Thermostats
Clean the front surface with a soft towel moistened with a mild soap solution (non-ammonia). Clean approximately
every six months. Do not spray cleaning solution directly at any wall control.
Danger: Any liquid entering products with line (mains) voltage may reach components, cause personal injury,
damage the equipment, and void the warranty.
Sensors
No maintenance required.
DIN/Processor Power Panels
Visually inspect installation periodically. Keep airflow clear of obstructions. DIN Power Panels generally need 12 in.
(300 mm) of clearance in front of the enclosure for airflow.
Battery powered devices (battery replacement)
Replace batteries as needed with the correct type of battery. See the individual product installation sheet for
battery specifications.
Please see the warranty enclosed with the product, or visit:
http://www.lutron.com/en-US/ResourceLibrary/warranty/Lim_Warranty_starting_Oct2011.pdf
For additional information, please refer to the corresponding data sheet, located at www.lutron.com/myRoom
Section 8: Warranty Information