Lutron Electronics EMC-9400SD, Руководство по эксплуатации

Страница: 19 / 30

5-3 Manual Datalogger ( Set sampling time = 0
second )
a. Set sampling time is to 0 second
Press the " Logger Button ( 3-8, Fig. 1 ) >2 Sec. , the LCD will
show the text " Logger ", then press the " Logger Button " (
3-8, Fig. 1 ) once, the " LOGGER " will flashing once and Beeper
will sound once, at the same time the measuring data
along the time information will be saved into the
memory circuit. The lower Display will show the
Position ( Location ) no. and saved into the SD card too.
Remark :
During execute the Manual Datalogger,
It can use the "
▲
Button " ( 3-5, Fig. 1) or "
▼
Button " ( 3-6, Fig. 1 ) to set the measuring position (
1 to 99, for example room 1 to room 99 ) to identify the
measurement location , the lower Display will show P x (
x = 1 to 99 ).
b. Finish the Datalogger
Press the " Logger Button " ( 3-8, Fig. 1) continuously at
least two seconds, the " Logger " indication will be
disappeared and finish the Datalogger.
5-4 Check time & Sample information
During the normal measurement ( not execute the
Datalogger ), If press " Time Button " ( 3-7, Fig. 1
) once , the TFT LCD display will present the time
information of Year, Month/Date, Hour/Minute & Sampling
time information .
17