Lutron Electronics DM-9983G Скачать руководство пользователя страница 5

2. SPECIFICATIONS

2-1 General Specifications

Green power

* Green power, battery is no need,

and

power supply from the handy

Hybrid power

generator, operate 10 to 20
seconds the generator will offer 
10 minutes energy typically.

* Hybrid power, meter also can

supply by the battery power.

Display              

46 mm x 45 mm large LCD display.

Measurement 

ACV, ACA, DCV, DCA, ohms,
continuity beeper, Hz, Capacitance,
Diode, Data hold.

A/D counts no.

6000 counts.

Range selection

Smart function, auto range or
manual range  selecting.

Smart function

" V " function can select ACV, DCV
automatically with auto range.

 " function can select the

Resistance,  Diode, Continuity
beeper, Capacitance automatically
with auto range.
" 10A " " mA " function can measure
ACA, DCA with auto range.

Data hold

To freeze the display reading on the 
LCD display.

* Available for auto range only.

Power On/Off

If meter is not operated within 3

management

minutes will auto power switch off.

Polarity             

Automatic Switching, " - " indicates
negative polarity.

Sampling time

Approx. 0.5 to 1 second.

Operating

0  to 50   (32 to 122  ).

Temperature

2

Содержание DM-9983G






















Отзывы: