4. FUNCTION SELECTION
1) Power ON the meter by pressing and holding the " Power
Button " ( 3-2, Fig. 1 )for at least 1.5 seconds .
*
Pressing the " Power Button " ( 3-2, Fig. 1 )
continuously and > 1.5 seconds again will turn off the
meter.
2) The meter can select 3 kind Mode as :
a.
Conductivity measurement
b.
TDS measurement
c.
Salt measurement
pressing and holding the " FUNCTION Button " ( 3-6, Fig. 1 )
continuously , Display will show the following text in sequence :
CD
Conductivity measurement
TDS
TDS measurement
SALT
Salt measurement
Until the Display show the desired mode the meter will
execute this FUNCTION with default.
7
