4
Programming Features
Athena system programming is initially created by Lutron in the Lutron Designer software. Many changes to
the system can then be performed using the Lutron app.
Scenes
Each area may contain up to 16 scenes plus an OFF scene. Area scenes are initially created in the Lutron
Designer software, and can then be modified with the Lutron app.
Keypads
Keypad wall controls and Pico wireless controls are initially created in the Lutron Designer software, and
programmed to activate scenes or perform other functions.
Timeclocks
Timeclocks are initially created in the Lutron Designer software. From the Lutron app, some properties of
the events may be edited (time / days of event, lighting intensity, CCT / Full Color for Ketra loads). Advanced
settings such as occupancy settings are not available for editing in the app at this time.
Occupancy
Occupancy programming and select sensor settings are defined in the Lutron Designer software.
Load Shed
Load shed (demand response) is configured inthe Lutron Designer software and can be tested by an FSE in
the Lutron Designer terminal. It can then be activated via Athena Automated Demand Response Kit.
Daylighting
Daylighting settings are defined in the Lutron Designer software.
Device Replacement
Device replacement may be performed in the Lutron Designer software by a Lutron FSE.
System Expansion
System expansion (adding new devices / areas) may be performed in the Lutron Designer software by a
Lutron FSE.
Shade Limits
Shade limit settings may be adjusted in the Lutron Designer software.
Trim Adjustment
Lighting device trim settings may be adjusted in the Lutron Designer software.
Emergency Lighting
Emergency lighting settings are defined in the Lutron Designer software.
Lutron Athena System User Guide
