Luthor TL 88, Инструкция по эксплуатации, Страница: 83 / 91

EN
81
In the TL-88 we will have to go to channel 33 and following the steps of menu 01
selecting the analogical sub tone CTCSS number 25. If the channel of the basic
equipment was 5, in the TL-88 would have to locate the channel 37 and thus depending
on the channel on which it is intended to operate.
To operate with the equipment, if the easier way for you is the display settings of a
basic handheld, you can convert the TL-88 to the basic format of visualization and use
of channels and for it we refer you to the INDEX OF ADVANCED OPTIONS (SOFTWARE)
placed in the page 54.
Among other many options with the programming soware you can simplify the use
of TL-88, erasing channels/memories scheduled originally and programming channels
from 1 to 8 with equivalent frequency. To do this, use the
"Table equivalence channel
number - free use” (located on page 75). In this format will be showed on the display
only the numbers from 1 to 8, then you could select whether you want the sub tone
number by accessing the menu 01.