• Press
MENU
.
• Use
VOL - / VOL +
to scroll the FM radio icon.
• Press
MENU
.
MENU OPTION
Exit: Leaves the menu without saving any of the changing.
5: FM RADIO
Be sure the FM antenna provided has been installed into the
speaker in order to pick up a signal.
To activate this menu:
Available options:
o
Save Channel: Press
MENU
to save the station currently playing.
You’ll see the number assigned to the station in the top line. Use
the
/
to scroll through the saved channels.
o
Speaker Open/close: Press on
MENU
to open the speaker. The
speaker will automatically default to close when you exit the
FM radio.
o
Delete channel: Click on
MENU
to delete the current station
from memory.
o
Delete All: Remove all channels from memory.
o
Auto Search: Scroll through FM band looking for channels.
o
Common Band: VHF Frequency – FM Band Radio 87.5mhz to
108mhz. The automatic default will be to Common Band.
o
Japan Band: VHF Frequency 76mhz to 90mhz
o
Exit: Leave this menu without saving anything. If you can’t get out
of the FM radio, hold
MENU
for a few seconds. If that doesn’t work
turn the
Lutema
speaker off using the on/off switch.
Tips for playing music:
• Scroll through the FM dial using
VOL - / VOL +
• Adjust the volume: hold
VOL - / VOL +
for two
seconds to bring up the volume bar. Then use
VOL - / VOL +
to decrease/increase volume.
If the device fails to get a radio signal, follow these steps:
• Move device away from other electronics using radio waves such as
cellular phones to avoid interference
• Remove any headphones connected to the device
• Plug in the Lutema RadioWave Antenna
• Power on the device and tune to a radio station
6 Line in
MENU OPTION
Connect to your computer or smartphone to use the Lutema
WaveCube as peripheral speaker.
To activate this option:
You’ll need the cord with a Line In/5V connector on one end and the
speaker headphone jack on the other. Plug the Line In connector into
the speaker and the headphone jack into your computer or smartphone.
• Press
MENU
.
• Use
VOL - / VOL +
to scroll the Line In (headphone icon).
• Press
MENU
.
• Start your computer’s/smartphone’s playlist. It will be redirected into
the speaker.
• Hold
VOL - / VOL +
to decrease/increase the volume.
15 is the loudest setting.
• If the volume is still low, adjust the computer volume level.
• You’ll still control the playing and pausing of tracks from your
computer.
• Speaker
• Line / 5V
• Headphones
• Antenna
• USB PC Port
• Micro SD Port
• Menu
• Previous Track
• Volume - (Hold)
• Next Track
• (Hold)
8
9
10
7
6
5
4
3
2
1
• Play/Pause
• Stop (Hold)
• Power
8
7
6
9
10
5
4
3
2
1